Cognex In-Sight 2800 Wiring/Software/Basic Config

Wiring diagram:
Cable type: CCB_M12x12Fy

Cable type: CCB-PWRIO-XX

SDK: In-Sight WebSDK 23.2.0

Software: In-Sight 23.2.0
Link download: https://support.cognex.com/en/downloads/in-sight/software-firmware

Scan Device

Image config

Typical configurations:

Trigger type: Exposure, Gain , Debounce

Exposure: The amount of time the lens is open to let light in to take a photo

Debounce: Time between trigger sensor receptions

Inspec settings section:

There are sections: select pattern, Read (read text), Read ID (read code),...

Setting Input/Output :

Default trigger is IN0

The pulse width setting should be increased if the output is to an external device: relay,...

Debounce time should be 0

Train reading:

Tranning mode : There is pre-Trained so users can retrain words if they make mistakes (min 3 times)

Character size: edit text size

The interface retrains the text